Arc flash Shirt HRC2 8.6cal/cm2 with Loxy FR Reflective Tape – Bool
Bool’s Arc flash Hi-Vis Shirt with Segmented Loxy Reflective Tape is suitable for working in HRC2 environments up to 8.6cal/cm2. The anti-static fabric dissipates electrostatic charge from across its’ surface reducing the risk of conductivity for the wearer.
Key Features:
- Hazard Risk Category: HRC2 8.6cal/cm2
- Size: S, M, L, XL, 2XL, 3XL, 4XL, 5XL
- Weight: 197gsm
- Colour: Orange
- Fire Retardant
- Anti-static fabric dissipates electrostatic charge from across its’ surface as per EN1149-3 reducing the risk of conductivity for the wearer
- Inherent FR fabric, with a blend of 32% cotton offering breathability and FR protection
- Strong reinforced ripstop fabric which is durable and resistant to tearing
- Segmented FR Silver Reflective Tape tested to standard AS/NZS 1906.4:2010
- X-back, H-front and biomotion sleeve tape to enhance visibility of limbs
- Concealed nylon studs
- Two front pockets, one with pen partition
- Two-way radio loops on garment shoulders
- UPF 50+ sun protection
- Wash at no more than 60°C
Standards:
- ASTM F1959M/F1959
- AS 4399
- AS/NZS 1906.4
- AS/NZS 4602.1
- AS/NZS 4836
- ASTM D2863
- EN 1149-3
- EN 1149-5
- ENA NENS 09
- EN ISO 11612
- IEC 61482-1-2
- NFPA 70E
- NFPA 2112
We also stock...
Industry Terms Explained – INHERENT
When it comes to Arc flash protection Volt Safety recommends the use of Inherent FR Fabric. Inherent FR Fabric means that the FR properties will not be diminished when the Arc flash PPE is laundered. Take for example Arc flash fabrics that have been treated with FR sprays. These fabrics
Exploring the Range of Arc Flash Hoods
We offer three types of arc flash hoods: Standard, Vented, and Lift Up, to keep you safe from the heat and energy of an arc flash in any work situation. Standard Arc Flash Suit Hood Ideal for general electrical work environments where the risk of arc flash is present but
Understanding Arc Flash Layering.
Arc Flash Layering effectively enhances protection against electrical hazards. This method involves combining multiple arc-rated garments to achieve a higher level of arc flash protection. Why is Layering Important? Layering is key for Arc Flash Safety. It lets you meet specific safety levels when the right gear isn’t easy to
How do I know what rating Arc Flash PPE to wear?
To calculate likely incident energy from a switchboard is time consuming, onerous, and technical. Variables include voltage, current, fault current, switchboard materials, switchboard opening dimensions and much more. Australian Standards acknowledges this, by virtue of AS4836, which gives a layman, conservative approach to choosing arc flash equipment in table 9.1.
Which is the correct Arc Flash standard to follow?
What is IEE1584? IEEE1584 is the industry accepted ‘Guide for Performing Arc-Flash Hazard Calculations’. This guide provides mathematical models for designers and facility operators to apply in determining the arc-flash hazard distance and the incident energy to which workers could be exposed during their work on or near electrical equipment.
What is an Arc Flash and why is it dangerous?
What on earth is an Arc Flash, and how do I choose the right PPE? Arc Flash clothing and PPE is not an easy product to select. Whilst most electrical PPE (insulated gloves, mats, sleeves) is chosen based on working voltage, Arc Flash is not. Arc flash calculations are complex, time