The Megger MIT400/2 is a handheld CAT IV insulation and continuity tester. It’s built for electricians and maintenance technicians testing electrical installations, cables and motors. It combines insulation resistance, continuity and voltage testing in one rugged unit. A stabilised test voltage gives accurate, repeatable results without the risk of over-voltage damage. The weatherproof over-moulded case makes it suited to work in the field.
Key features:
- Operating temperature: −10 to +55 °C.
- Dimensions: 228 (L) × 108 (W) × 63 (D) mm.
- Weight: 600 g.
- Three insulation test voltages: 250, 500 and 1000 V.
- Wide insulation resistance range: Up to 50 GΩ at 250 V, 100 GΩ at 500 V and 200 GΩ at 1000 V.
- Stabilised test voltage: Holds the output within −0% to +2% of the set voltage, which prevents over-voltage damage.
- Test lock: Holds the insulation test on for hands-free testing.
- Fast continuity testing: Single auto-range from 0.01 Ω to 1 MΩ at 200 mA.
- Lead null: Compensates for up to 9 Ω of test lead resistance.
- AC/DC voltage measurement: True RMS up to 600 V AC/DC.
- Live circuit detection: Blocks insulation testing when it detects voltage above a user-set limit (the default is 50 V).
- Analogue arc and dual digital display: Shows the measurement and the actual test voltage at the same time.
- Rugged design: Rubber over-moulded case with a back stand.
- Battery life: At least 3000 insulation tests at 1000 V from six AA alkaline or NiMH batteries.
- Supplied with: Silicone test leads with probes and clips, batteries, a hard carry case and a calibration certificate.
Standards:
- CAT IV 600 V
- IP54
- IEC 61010-1 (AS 61010.1) – Safety requirements for electrical equipment for measurement, control and laboratory use – Part 1: General requirements
- EN 61557-1 – Electrical safety in low voltage distribution systems up to 1000 V AC and 1500 V DC – Part 1: General requirements
- EN 61557-2 – Electrical safety in low voltage distribution systems up to 1000 V AC and 1500 V DC – Part 2: Insulation resistance
- EN 61557-4 – Electrical safety in low voltage distribution systems up to 1000 V AC and 1500 V DC – Part 4: Resistance of earth connection and equipotential bonding
- IEC 61326 – Electrical equipment for measurement, control and laboratory use – EMC requirements
- IEC 60529 (AS 60529) – Degrees of protection provided by enclosures (IP Code)


Loading…








