Arc flash Wet Weather Trouser HRC2 17cal/cm2 – Tuffa
Tuffa’s Arc flash Wet Weather Trouser is suitable for working in HRC2 environments up to 17cal/cm2.
Key Features:
- Hazard Risk Category: HRC2 17cal/cm2
- Sizes: S, M, L, XL, 2XL, 3XL, 4XL
- Colour: Navy
- Made from water resistant material
- Outer fabric manufactured from 98% Polyester, 2% Carbon
- Inner fabric manufactured from 60% Modacrylic, 40% Cotton
- Fully sealed seams
- Elastic waist
- Side hip pockets
- FR cotton lining to make it more comfortable against the skin
- FR sew on 50mm silver reflective tape, hoop style, biomotion
- Lower ankle side gusset zips, to allow easy access over or on your boots
Standards:
- EN/ISO 11612
- ASTM F1891
- NFPA 70E
- EN 1149.5
- AS/NZS 1906
- AS/NZS 4602.1
We also stock...
-
Arc flash Switching Coat HRC4 47cal/cm2 – BSD
Add to Quote This product has multiple variants. The options may be chosen on the product page -
Chin Strap 2 Point – Voss
Add to Quote
Industry Terms Explained – INHERENT
When it comes to Arc flash protection Volt Safety recommends the use of Inherent FR Fabric. Inherent FR Fabric means that the FR properties will not be diminished when the Arc flash PPE is laundered. Take for example Arc flash fabrics that have been treated with FR sprays. These fabrics
Exploring the Range of Arc Flash Hoods
We offer three types of arc flash hoods: Standard, Vented, and Lift Up, to keep you safe from the heat and energy of an arc flash in any work situation. Standard Arc Flash Suit Hood Ideal for general electrical work environments where the risk of arc flash is present but
Understanding Arc Flash Layering.
Arc Flash Layering effectively enhances protection against electrical hazards. This method involves combining multiple arc-rated garments to achieve a higher level of arc flash protection. Why is Layering Important? Layering is key for Arc Flash Safety. It lets you meet specific safety levels when the right gear isn’t easy to
How do I know what rating Arc Flash PPE to wear?
To calculate likely incident energy from a switchboard is time consuming, onerous, and technical. Variables include voltage, current, fault current, switchboard materials, switchboard opening dimensions and much more. Australian Standards acknowledges this, by virtue of AS4836, which gives a layman, conservative approach to choosing arc flash equipment in table 9.1.
Which is the correct Arc Flash standard to follow?
What is IEE1584? IEEE1584 is the industry accepted ‘Guide for Performing Arc-Flash Hazard Calculations’. This guide provides mathematical models for designers and facility operators to apply in determining the arc-flash hazard distance and the incident energy to which workers could be exposed during their work on or near electrical equipment.
What is an Arc Flash and why is it dangerous?
What on earth is an Arc Flash, and how do I choose the right PPE? Arc Flash clothing and PPE is not an easy product to select. Whilst most electrical PPE (insulated gloves, mats, sleeves) is chosen based on working voltage, Arc Flash is not. Arc flash calculations are complex, time
Arc flash Wet Weather Trouser HRC2 Size Chart