Your Preferred Electrical Safety Supplier

Easier, Faster And More Economical
Guaranteed ~ Tested ~ In Stock

Contact

Australia: 1300 865 888
New Zealand: +64 9263 4566
International: +61 7 3282 0647
Email: [email protected]

AUS: 1300 865 88
NZ: +64 9263 4566
International: +61 7 3282 0647
Email: [email protected]

Non-Vented Type 1 Hard Hat with Ratchet Harness
Vented Type 1 Hard Hat with Ratchet Harness

Non-Vented Type 1 Hard Hat with Ratchet Harness – Force360

Where to Buy
SKU: HELMET-F-HPFPRGTE02- Categories: ,

Force360’s Non-Vented Type 1 Hard Hat with Ratchet Harness is designed to protect your head from impacts while on the job.

Key Features:

  • Colours: White, Orange, Fluro Orange, Red, Green, Blue, Fluro Yellow, Yellow, Grey
  • Ultra-light hard hat for all day wear
  • Padded and nape adjustable ratchet for a customised fit
  • Fabric 6 point adjustable height harness with crown strap spreader
  • 30mm universal slot to suit most accessories
  • Designed and manufactured in Australia
  • Customisable 5 colour, 4 position printing, up to 120mm width
  • Fully plastic free, recyclable, and retail ready packaging
  • Ideal for dust and chemical environments such as construction, building, mining, forestry and general purposes
  • Australian Made

Standards:

  • AS/NZS 1801
  • AS/NZS1801:2024 Clause 4.6 650V*
  • Tested to ANSI/ISEA Z89.1:2014 Clause 10.7.4.1 Class G 2200V*
  • Tested to ANSI/ISEA Z89.1:2014 Clause 10.7.4.2 Class E 20000V*
*Type tested and complies to standard

 

We also stock...

Care and Maintenance

  • Date stamp is located on the inside at the very top of the hard hat. You will need to move the harness across to see the stamp. Numbers ranging from 1 – 12 signify the month of the year and the number in the centre of the dial represents the year of manufacture.
  • Hard hats should be replaced after 3 years from date of issue with the internal harness replaced every 2 years.
  • Inspect the shell, headband, suspension system and other accessories daily before use. These inspections should focus on finding cracks, tears, punctures, holes and any other damage. The headband mustn’t be stretched or worn out and the hat should always fit well and comfortably
  • You should immediately replace a hard hat if there are any signs of cracking, perforation or deformity to any part of the hard hat
  • You should immediately replace a hard hat if there is any indication of exposure to heat, chemicals, UV light or any signs of flaking and loss of surface gloss
  • You should immediately replace a hard hat if it experiences any serious impact, even if it shows no visible signs of the impact
  • Store the hard hat in a safe environment that is away from any direct sunlight or extremes of temperature
  • Avoid contact with paints, paint thinners or corrosive cleaning agents, which can weaken the shells of the hats and even eliminate electrical resistance
  • Clean the hard hat regularly with warm water and soap, allowing it to air dry

You may also like…